PHYSICAL AND MECHANICAL PROPERTIES OF PANEL BASED ON OUTER BARK PARTICLES OF WHITE BIRCH: MIXED PANELS WITH WOOD PARTICLES VERSUS WOOD FIBRES

Roger Pedieu, Bernard Riedl, Andre Pichette

Abstract


The use of outer white birch bark in canoes is an example of its oldest use by the fi rst nations in Canada. This use confi rms the hydrophobic characteristics of this bark, which can be capitalized on by using it in the outer layers of three-layer mixed composite panels in order to protect them from water infi ltration from their surface. These panels were made up of outer white birch bark particles in the surface layers with coarse wood particles or wood fi bres in the core layer. A factorial experiment used in a complete block design permitted to carry a suitable statistical analysis of measured properties. The two main considered factors were respectively the bark percentages in the surface layers with three levels and the type of material used in the core with two levels. Four replicates were done for each panel. The panels with wood particles in the core layer gave physical and mechanical properties satisfying the indoor requirements for particleboards and those with wood fi bres in the core layer passed the requirement of medium fi bres density board. Panel with 45% bark particles in the surface and 55% wood particles in the core was selected as the best because of its good dimensional stability.

Keywords: compuesto hidrofóbica de corteza, propiedades físicas y mecánicas, paneles mixtos.


Full Text:

PDF (Español)

Refbacks

  • There are currently no refbacks.